The Microflex MidKnight disposable, chlorinated, powder-free, standard length nitrile glove is fully textured along the fingertips, fingers, and palm and has a black color that hides stains and helps prevent visual distraction. It has a palm thickness of 4.7 mils and a finger thickness of 5.5 mils, and is 9.6" long from the tip of the middle finger to the edge of the beaded wrist cuff, which is 3.1 mils thick. It is suitable for automotive, emergency medical services, funeral, industrial safety, laboratory, law enforcement, and tattoo applications. Nitrile provides better elasticity than vinyl, better puncture resistance than latex or vinyl, better abrasion resistance than chloroprene, and helps reduce the likelihood of allergic reaction. The glove is textured on the fingertips, fingers, and palm for improved grip, particularly in wet conditions, compared to a glove with textured fingers. It has been washed in a diluted chlorine-based solution to help reduce tackiness, providing lower surface friction than a non-chlorinated glove and allowing quick donning in wet environments. This powder-free glove leaves no residue, helping to reduce the likelihood of spreading bacteria compared to a powdered glove. The color of this ambidextrous glove is black. Tensile strength, measured in megapascals (MPa), is the amount of force required to rip a glove; the higher the number, the stronger the glove material. This glove has a tensile strength of 27 MPa before aging and 24 MPa after aging. Elongation measures how much a glove can be stretched before it breaks. It is expressed as a percent of the original length of the glove at the moment of breakage, and the higher the percent, the more the glove can stretch. This glove has an elongation of 500% before aging and 400% after aging. Acceptable Quality Level (AQL) is a Food and Drug Administration (FDA) quality specification for the defect rate in surgical and exam gloves. The FDA requires an AQL of 1.5 for surgical gloves and 2.5 for exam gloves. This glove has an AQL of 1.5, which means the defect level from a large sample of the gloves will not exceed 1.5%. Microflex examination gloves meet or exceed applicable standards imposed by ASTM International, formerly known as the American Society for Testing and Materials (ASTM), and the FDA. Disposable and limited-use gloves are used in medical, forensic, scientific, art, and industrial applications. Gloves are commonly made from flexible materials such as latex, nitrile, chloroprene, and vinyl. While most disposable gloves are designed for either hand, some can be purchased in hand-specific models. They are offered powdered or powder-free; silicone or silicone-free; chlorinated or non-chlorinated; coated or uncoated; with a standard- or extended-length cuff; sterile or non-sterile; and with textured or smooth fingers, fingertips, and palms. A glove's abrasion, cut, and puncture resistance is defined by glove material and thickness, and may be improved with the use of certain exterior coatings. Abrasion resistance means the glove helps protect the hand from contact with rough objects. Cut resistance means the glove helps protect the hand from blades and sharp instruments. Puncture resistance means the glove helps protect the hand from pointed objects such as pins and needles. Chemical resistance means the glove helps protect the hand from certain chemicals. Chemical resistance is defined by glove material, thickness, and length, as well as the work environment and chemicals likely to be encountered. For information on the chemical resistance of this glove, consult the manufacturer's chemical resistance guide. Microflex Corporation manufactures disposable gloves. The company, founded in 1988 and headquartered in Reno, NV, meets International Organization for Standardization (ISO) 13485:2003.
Best #117 heritage rib entrance mat. Heritage Rib offers a heavier-weight double rib high/low design that performs the scraping function of the mat. This medium to heavy traffic entrance mat is intended for areas that need extra moisture retention and scraping action and has 33 percent more carpet than many competitors’ "best" rib mats. Test - Test Description - Results: (1) Abrasion Resistance ASTM D3884-01 - Test specimen is subjected to the rubbing action of two abrading wheels under controlled conditions. Results measured in weight loss (Grams) - 1.52. (2) Accelerated Wear - Test specimen is subjected to the action of rollers under a specified load. Sample is rotated 10 degree after each pass. Results measured in thickness loss (percent). - 21.29 percent. (3) Accelerated Soiling ASTM D6540-00 - Test specimen is subjected to an accelerated soiling process. for a predetermined length of time. The sample is vacuumed, rated, submitted to an extraction device, then rated again. - (Based on visual inspection) 3.5 - Vacuum Rating 4.5 - Rating After Extraction. (4) Water Retention - Test specimen is submerged in water for 5 minutes, removed, drained for 15 seconds and weighed. Results measured in weight gain. (Gallons per square yard) - 0.60. (5) Flammability ASTM D2859 (CPSC FF 1-70) - Intended to measure the mattings response to an ignition source in a controlled environment. The uncharred area of the test specimen must be greater than 1 inch to pass. - 3.5 inches. All testing of NoTrax floor matting has been performed by an independent testing laboratory.
NoTrax Atlantic Olefin entrance carpet mat. Designed for use in light to medium foot traffic areas, Atlantic Olefins' durable olefin fibers provide moisture and dirt retention at entrances and passageways; reducing slip hazards and floor care maintenance. Atlantic Olefin is a step above the commodity entrance mat and is intended for all medium traffic areas including entrances and lobbies. A vinyl non-slip backing helps to minimize mat movement. Application requirements: good water absorbing qualities, aesthetically pleasing and functional. Application requirements: good water absorbing qualities, aesthetically pleasing and functional.
Oreck Replacement Bags, Advance Filtration, 25-pack, fits all U2000 Series Uprights.
A lightweight, and durable fabric, DuPont Tychem QC utilizes the strength of DuPont Tyvek fabric and a polyethylene coating. Tychem QC fabric provides at least 30 minutes of protection against 42 chemical challenges. Tychem QC is used for light splash protection in a variety of industrial environments, including petroleum refining, pulp and paper manufacturing, food processing, chemical processing, and pharmaceutical manufacturing. Standard Fit Hood. Elastic Wrists and Ankles. Storm Flap with Adhesive Closure. Bound Seams.
Perfect for Class time or play time! chairs stack four high to save space when not in use. Bentwood chairs are made of multi-ply birch with a uni-body design contoured for healthy posture, smooth rounded edges, and non-scuff boots to reduce noise and protect flooring. Check for loose or worn parts periodically and tighten or replace as necessary. Use a clean, damp cloth or sponge with mild soap, non-bleach detergent, or general purpose cleaner. Abrasive cleaners or powders should not be used as they may permanently dull or scratch the surface. Remove chairs from service If boots become loose or are missing. Replacement boots available.
This steel stool is durable and versatile. Strong 18 Gauge steel frame is designed to last for years. Masonite seat is riveted to the seat pan and will not warp. Steel frame is grey powder coated. Stool is rated for 300 lbs. weight capacity. Comes with self-leveling steel glides. Adjusts in 1 inch increments from 25 to 33"
These Empty Clear PET Plastic Juice Bottles with Tamper Evident lids by MT Products are the perfect product for anyone who makes their own juices / beverages or smoothies. These containers are also a great idea to store dressings, sauces, condiments or just use them as a clear water bottle. These bottles are not dishwasher safe.